Categories

The superb 'Click' Blade Holder for your Cougar, Craft Robo, Cameo or Silver Bullet
This click adjustable blade holder allows you to choose any one of six different blade depths simply by turning the numbered top until it "clicks" into the position you want.

This is the holder we recommend for use with the 60 plus blade. It also works superbly well with any of the standard Cougar and Silver Bullet blades.

Supplied with one blade, choose from 45 or 60 degree.

For blades see items below

30 Degree Blade
For cutting fabric
Fits both Cougar and Silver Bullet standard Holders and the Click Holder

45 Degree Blade (cap colour may vary)
For cutting paper, vinyl and thin cardstock
Fits both Cougar and Silver Bullet standard Holders and the Click Holder

60 Degree Blade (cap colour may vary)
For cutting thick cardstock
Fits both Cougar and Silver Bullet standard Holders and the Click Holder

60 Degree Plus Blade (cap colour may vary)
For cutting thick media such as chipboard and for fibrous and dense cardstock
Fits both Cougar and Silver Bullet standard Holders and Click Holder, but for best results we recommend the Click Holder

Detail Blade holder for the Cougar and Silver Bullet. This precisely machined Blade holder fits the Cougar and silver Bullet and is particularly good at detailed intricate cutting

A 45 degree blade is included in the standard price, or choose a 60 degree blade for an additional £2.
Replacement/extra blades are only £10.25 for the 45 degree and £12.25 for the 60 degree

For blades see items below

45 Degree Detail Blade
For cutting paper, vinyl and thin cardstock
Fits both Craft Robo GR01 Holder and Cougar and Silver Bullet Detail Holder

Detail Holder

60 Degree Detail Blade
For cutting cardstock
Fits both Craft Robo GR01 Holder, Cougar Detail holder and Silver Bullet Detail Holder

Replace the Craft Robo / Wishblade / Cameo blade holder.
This precisely machined Blade Holder fits all models of Craft Robo, Wishblade & Quickutz Silhouette and Silhouette Cameo!

No more messing about with different tips and holders. This one allows you to rotate the blade in or out at will.

In for fine work

Out for thicker work.

A 45 degree blade is included in the standard price, or choose a 60 degree blade for an additional £2.
Replacement/extra blades are only £10.25 for the 45 degree and £12.25 for the 60 degree.

For blades see items above

Transparent and gridded A4 Carrier sheet already coated with a low tack adhesive. Exterior size - 14" x 9" (35.6cm x 22.8cm)

60 degree blade for the original Craft Robo/Wishblade/Silhouette holders and for the GR02 holder pictured above.

Pack of two transparent and gridded A4 Carrier sheets already coated with a low tack adhesive.
Exterior size - 14" x 9" (35.6cm x 22.8cm)

Gridded Carrier sheet coated with a low tack adhesive.
Exterior dimensions - 16.75" x 15" (42.5cm x 38cm)

Fits -
Lynx 12
Cougar 13, 15, 18 and 24
Silver Bullet 13, 15, 18 and 24

Note: Lynx mat is 16" wide

Gridded Carrier sheet coated with a low tack adhesive.
Exterior dimensions - 16.75" x 30" (42.5cm x 76cm)

Fits -
Lynx 12
Cougar 13, 15, 18 and 24
Silver Bullet 13, 15, 18 and 24

Note: Lynx mat is 16" wide

Gridded Carrier sheet coated with a low tack adhesive.
Exterior dimensions - 21.75" x 15" (55cm x 38cm)

Fits -
Cougar 18 and 24
Silver Bullet 18 and 24

Gridded Carrier sheet coated with a low tack adhesive.
Exterior dimensions - 21.75" x 30" (55cm x 76cm)

Fits -
Cougar 18 and 24
Silver Bullet 18 and 24

Gridded Carrier sheet coated with a low tack adhesive.
Exterior dimensions - 27.75" x 15" (70.5cm x 38cm)

Fits -
Cougar 24
Silver Bullet 24

Gridded Carrier sheet coated with a low tack adhesive.
Exterior dimensions - 27.75" x 30" (70.5cm x 76cm)

Fits -
Cougar 24
Silver Bullet 24

Gridded Carrier sheet coated with a high tack adhesive. Suitable for use with fabric, leather, glue foil etc.
DO NOT USE WITH PAPER OR CARDSTOCK
Exterior dimensions - 16.75" x 15" (42.5cm x 38cm)

Fits -
Lynx 12
Cougar 13, 15, 18 and 24
Silver Bullet 13, 15, 18 and 24

Note: Lynx mat is 16" wide

Double Ended Embossing Tool for Cougar and Silver Bullet
Comes with 1mm and 2mm tip.
A true embossing tool to create beautiful embossed effects on your cardstock, paper and vellum. The supplied tips can be interchanged with other larger ones.

Requires a special embossing mat - see below

Diamond Tipped Engraving Tool
Fits Silver Bullet, Cougar and Craft Robo
For engraving, creasing and etching.
Diamond tip lasts a really long time!

For use with your Cougar or Silver Bullet.
Produces a delicate punched hole with can be used with either the front or back of the media as the finished side.

Works with paper, card, metal foils, vellum etc

Click on DETAILS to see samples

For use with the Embossing tool.
Colour of foam may vary
Exterior dimensions - 16.75" x 15" (42.5cm x 38cm)

Fits -
Lynx 12
Cougar 13, 15, 18 and 24
Silver Bullet 13, 15, 18 and 24

Note: Lynx mat is 16" wide

For use with the Craft Robo - now you can cut media on a mat that is 9" by 28" long! (22.8cm x 71.2cm)
Usable length is 26" (66cm)
Coated with low tack adhesive.
Just set the cutting length in your software - no more joining lengths of card together

Re-Nu Starter Kit
The perfect solution to re-sticking your mats. Simply rub the adhesive off on your mat and you are ready to go - no mess, no fuss, no drying time.

Uses the same adhesive as that on your Black Cat carrier mats so you know it is going to work.

If your mat has a lot of paper pulp or dirt on it we would suggest you clean it first but if it is not dirty or covered with paper pulp go right ahead and adhere it.
We have made this replacement adhesive in a very generous size so you can use a portion of it or all of it at once, saving you money.

This kit comes with two adhesive sheets and one squeegee.
Sheets are a very generous 13.5"x 27.5"(34cm x70cm)

Re-Nu Single Sheet
The perfect solution to re-sticking your mats. Simply rub the adhesive off on your mat and you are ready to go - no mess, no fuss, no drying time.

Uses the same adhesive as that on your Black Cat carrier mats so you know it is going to work.

If your mat has a lot of paper pulp or dirt on it we would suggest you clean it first but if it is not dirty or covered with paper pulp go right ahead and adhere it.
We have made this replacement adhesive in a very generous size so you can use a portion of it or all of it at once, saving you money.

This kit comes with a single adhesive sheet sized at a very generous 13.5"x 27.5"(34cm x70cm)

Re-Nu 5 Pack
The perfect solution to re-sticking your mats. Simply rub the adhesive off on your mat and you are ready to go - no mess, no fuss, no drying time.

Uses the same adhesive as that on your Black Cat carrier mats so you know it is going to work.

If your mat has a lot of paper pulp or dirt on it we would suggest you clean it first but if it is not dirty or covered with paper pulp go right ahead and adhere it.
We have made this replacement adhesive in a very generous size so you can use a portion of it or all of it at once, saving you money.

This kit comes with five adhesive sheets.
Sheets are a very generous 13.5"x 27.5"(34cm x70cm)

Additional Embossing Tip - 3mm
Ideal for fill embossing.

Optional Adapter Cable
We highly recommend the purchase of this cable if you are experiencing communication problems between cutter and computer.

Additional Embossing Tip - 6mm
Ideal for fill embossing larger areas.